Roof Replacements
Full Roof Replacement in Sydney
The whole roof off, the whole roof done right, in one coordinated job.
A full roof replacement means renewing the entire roof as one system, right down to the frame: tiles or sheets, battens, sarking, valleys, ridge capping and flashings. It is the right call when damage or age is widespread rather than confined to one area. Doing it all at once avoids the mismatched, staggered look of piecemeal work, resets the clock on every component, and gives you a single warranty across the whole roof instead of a patchwork of different ages.
What a full replacement actually covers
We strip the entire roof surface, inspect and repair or replace the battens, lay all-new sarking across every plane, and install new tiles or sheets throughout. Every valley, ridge, hip and wall flashing is renewed, and penetrations for vents, flues and skylights are re-flashed. Nothing old is left in place to become the weak link, which is the whole point of going full rather than partial.
Staging the job so your home stays dry
We do not strip a whole roof and leave it exposed. Work is staged section by section, with each area made weathertight before we move on, and temporary covers ready if weather turns. On a typical Sydney home the surface work runs several days depending on size, pitch and access. We keep you posted on timing and never leave the roof open to a forecast storm.
One warranty across the whole roof
A big advantage of full replacement is consistency. Every component is the same age, from the same job, under one workmanship warranty and the relevant material warranties. Compared with years of patch repairs, that gives you a clear, single point of accountability and the confidence that the roof will perform as a whole rather than failing wherever the oldest section happens to be.
What's Included
- Complete strip of the existing roof to the frame
- Inspection and replacement of battens as needed
- New reflective sarking across all roof planes
- Supply and install of new tiles or sheeting throughout
- Renewal of all valleys, ridges, hips and flashings
- Staged weathertight work with full site clean-up
Frequently Asked Questions
What is the difference between a full replacement and a re-roof?
They are broadly the same thing. Both mean stripping the old roof surface and rebuilding it as a system, including sarking, battens and flashings. Some people use re-roof loosely to mean re-covering only, but a proper full replacement always renews the underlying components too.
How long does a full roof replacement take?
For most single-storey Sydney homes, the surface work takes several days depending on size, pitch and access; larger or two-storey homes take longer. Weather can extend it, since we stage the work to keep your home dry rather than rush an open roof.
Can I switch from tile to metal during a full replacement?
Yes, and a full replacement is the natural time to do it. Because the whole roof is coming off anyway, changing from heavy tiles to lighter metal is straightforward. We will check the frame suits the change and advise on any structural or pitch considerations.
Will I need to vacate during the work?
No. We stage the job so the house stays weathertight and liveable throughout. Expect noise, some dust and workers on site during the day, but you can stay in the home for a standard full roof replacement.
Request a Free Inspection
Book a free, no-obligation inspection with our local crew.
Ready To Protect Your Home?
Book Your Free Roof Inspection Today.
Whether you need emergency roofing, leak detection, storm damage repairs or simply peace of mind, our experienced roofing specialists are ready to help. No pressure. No hidden costs. Just honest roofing advice.